Products Description
Zkseasy universal servo drive refer to three low-voltage drives: ZKSY830ABS pulse version, YKB200 bus version, and YKB300 bus version. These are control devices capable of precise control of servo motors.
All three drivers adopt closed-loop control systems, achieving ultimate precision control of servo motor position, speed, and torque, ensuring micro-level accuracy for every operation. Their fast response mechanism allows the motor to instantly respond to control instructions, making it effortless whether accelerating, decelerating, or accurately positioning.
In terms of communication, the drivers are equipped with diverse interfaces such as 485 pulse signal, 232 pulse signal, Ethercat, etc., enabling efficient data exchange and control.
Additionally, the general servo motor driver offers a rich software program that covers functions like system initialization, interface control, DSP module configuration, etc. Notably, the YKB driver can be automatically upgraded, providing users with robust technical support and convenient operation experience. Furthermore, all three drivers provide both English and Chinese versions of the software operation interface for the convenience of operators from various countries.
In terms of size, the YKB200 is the most compact with a volume as small as 63mm*51mm*13mm; the ZKSY830ABS has the largest size at 118mm *75.5mm*24mm; and the YKB300 has a moderate size of 121mm*65.5mm *22.7mm.
Moreover, many users have been troubled by the issue of connecting drivers and motors. Here are some tips for connecting drivers and motors:
When debugging a motor, one is often troubled by wiring issues due to incompatible interfaces. Therefore, the motor and driver cannot be directly connected; instead, an interface adapter cable is needed for conversion. Secondly, when unfamiliar with various cables, look for plug heads on the cables and identify them according to the two plug heads on the servo motor's power line adapter cable and encoder line adapter cable. The power line adapter cable connects one end to U, V, W terminals on the drive and the other end to the power line of the servo motor. The encoder line adapter cable connects one end to the Encoder port on the drive and the other end to the encoder line of the servo motor. When debugging, you will need a power supply and computer; at this time, use a power cord to connect to the positive and negative terminals of the power supply, which correspond to the debug ports on the drive. Connect the debug line to the debug port. (Note: 1. The debug line also needs to be connected to a network cable to control it on the computer. 2. When the adapter cable length is insufficient, extend it using extension cables.)
Hot Tags: universal servo drive, China universal servo drive manufacturers, suppliers
