News

Do not apply direct impact to the shaft during installation. The connection between the servo motor encoder shaft and the machine should use flexib...

Alignment trouble is the technical difficulty of servo encoder maintenance and replacement, because the general servo motor manufacturers in order ...

In terms of control strategy, the voltage frequency control method and the open-loop flux trajectory control method based on the steady-state mathe...

For a long time, in the occasion of requiring high speed regulation performance, the speed regulation system using DC motors has been dominant. How...

Material metering The measurement of powdery materials is commonly used in the way of screw measurement, and the purpose of measurement is achieved...

History Since the 80s of the 20th century, with the development of integrated circuits, power electronics technology and AC variable speed drive te...

The structure of the stator of the AC servo motor is basically similar to that of the capacitive split-phase single-phase asynchronous motor, and t...

By a photoelectric code disc with an axis in the center, there is a ring on, a dark engraved line on it, and a photoelectric transmitting and recei...

1. OC output: It is commonly said that the triode output, and the input impedance and circuit circuit need to be considered for connection. 2. Volt...

Requirements for servo feed systems 1. Wide range of speed regulation 2. High positioning accuracy 3. There is sufficient transmission rigidity and...

The mainstream servo drives all use digital signal processors (DSPs) as the control core, which can realize more complex control algorithms and rea...

The structure of the stator of the AC servo motor is basically similar to that of the capacitive split-phase single-phase asynchronous motor, and t...